Question 1

What Is the Average Cost of ICRA Walls Per Square Foot Installed?

Accepted Answer

We don't quote ICRA-compliant wall systems on a per-square-foot basis from a public price list because scope, site conditions, and configuration all affect the final number. What we can say is that reusable modular systems with ICRA Class IV and V compliance cost significantly less per linear foot over a multi-phase healthcare project than drywall, which must be rebuilt from scratch on every phase. Contact us for a project-specific quote.

Question 2

How Does the Price of ICRA Walls Compare to Traditional Wall Systems?

Accepted Answer

Modular ICRA-compliant systems have a higher upfront cost than drywall materials alone, but when you factor in the full lifecycle — including the 14-fold labor time reduction at installation, elimination of drying dead time, no teardown labor, and no disposal cost — the total project economics typically favor modular systems, especially for multi-phase healthcare renovation programs. A 5-phase, 100-linear-foot project saves approximately $41,000

Question 3

How Do I Know if I Need ICRA Walls for My Project?

Accepted Answer

ICRA (Infection Control Risk Assessment) is required whenever construction or renovation activity occurs in or adjacent to occupied healthcare facilities. The ICRA process, governed by ASHE ICRA 2.0 guidelines, produces a construction activity type (Type A through D) and a risk group classification that together determine the required barrier class. Projects affecting or adjacent to immunocompromised patients, intensive care units, oncology wards

Question 4

What Are the Key Benefits of Using ICRA Walls in Healthcare Facilities?

Accepted Answer

ICRA-compliant barriers prevent the migration of construction dust, fungal spores (primarily Aspergillus), and airborne particulate into patient areas. This matters because hospital-acquired fungal infections have documented mortality rates of 65–100% in immunocompromised patients, and approximately 50% of documented healthcare Aspergillus outbreaks are directly linked to construction activity. Beyond patient safety, ICRA compliance protects the

Question 5

What Are the Key Differences Between ICRA Walls and Standard Partition Walls?

Accepted Answer

Standard partition walls are designed for permanent space division and are not engineered for construction-phase containment. They have no particular dust seal at the floor or ceiling plane, no designed integration with negative air pressure systems, and no tested compliance with ICRA Class performance requirements. ICRA-compliant modular walls are specifically designed with floor-to-ceiling seals, engineered connections that minimize gaps, and t

Question 6

How Do ICRA Walls Compare to Traditional Drywall in Terms of Safety?

Accepted Answer

In the context of healthcare construction, modular ICRA-compliant systems are significantly safer in practice than drywall. Drywall installation itself generates substantial fine dust during cutting, which can contaminate patient areas if the containment area isn't pre-contained. Drywall demolition at phase completion is a high-dust event. Modular systems install and remove with no cutting, no sanding, and no dust generation, dramatically reducin

Question 7

What Installation Challenges Should I Expect With ICRA Walls?

Accepted Answer

The main challenges are the same as occupied facility installations generally: ceiling height variation, irregular floors, corridor obstructions, and coordination with HVAC and negative air systems. Healthcare-specific additions include after-hours work restrictions, infection control clearance requirements before accessing certain zones, and coordination with facility engineering to isolate HVAC zones and manage pressure relationships. 5DCCS cre

Question 8

Can ICRA Walls Effectively Reduce Noise and Vibration in My Space?

Accepted Answer

Yes, to a meaningful degree. The modular systems 5DCCS provides for healthcare applications carry STC ratings from 21 up to 40. STC 21–40 provides measurable attenuation of mid and high-frequency construction noise. Vibration control is a separate consideration from airborne noise — it typically requires coordination with the structural system — but properly installed modular walls do provide a physical barrier that red

Question 9

How Long Do ICRA Walls Typically Last Before Needing Replacement?

Accepted Answer

The panels themselves are rated for 20 or more reuse cycles with proper care, and the primary STARC product line carries a 2–3 year manufacturer warranty. Healthcare facilities running ongoing renovation programs can expect years of service life from an owned or rental system. Rental customers don't manage this — 5DCCS reconditions and maintains the system between deployments.

Question 10

What Certifications or Standards Should I Look for When Choosing ICRA Walls?

Accepted Answer

Key certifications and performance standards include: ICRA Class IV or V compliance (ASHE ICRA 2.0 framework), ASTM E84 Class A fire rating (required in virtually all occupied commercial and healthcare environments), and STC rating documentation for acoustics. For projects with specific egress or fire separation requirements, ASTM E119 1-hour fire rating may be required. Certifications should be verified against current product specifications fro

Question 11

Can I Customize ICRA Walls to Fit Specific Design or Functional Requirements?

Accepted Answer

Yes. Panel widths range from 6" to 48", heights adjust with telescoping systems, and stackable extensions reach well above standard ceiling heights. Vision panels can be integrated into wall runs. For multi-phase healthcare projects, the same panels can be reconfigured between phases without replacement. Graphics and wayfinding information can be added to panel faces. 5DCCS works with GCs and facility managers during pre-construction planning to

Question 12

Are ICRA Walls Compliant With All Relevant Building Codes and Safety Standards?

Accepted Answer

The modular systems 5DCCS provides are tested and certified to the relevant performance standards: ASTM E84 Class A fire rating (standard across product lines), ASTM E119 1-hour fire rating, NFPA 241 compatibility, and ICRA Class IV/V compliance. They meet or exceed the requirements of the California Building Code for temporary barriers in occupied buildings. Specific code compliance for a given project should always be confirmed

Question 13

How Easily Can ICRA Walls Be Integrated Into Existing Building Structures?

Accepted Answer

Very easily, in most cases. Modular systems use non-penetrating floor and ceiling tracks that sit against existing surfaces without drilling or anchoring. They work on concrete, tile, carpet, and most finished floor surfaces. Ceiling connections are similarly non-penetrating. Where structural elements like beams, columns, or ductwork interrupt a wall run, panels can be cut to fit or configured around the obstruction. 5DCCS handles this assessment

Question 14

How Do ICRA Walls Contribute to Infection Control in Medical Environments?

Accepted Answer

ICRA-compliant walls create a physical containment zone that, when combined with negative air pressure, prevents construction particulate — including Aspergillus spores, fine silica dust, and demolition debris — from reaching patient areas. Negative air machines draw air from the occupied zone through the work zone and exhaust it through HEPA filters to the exterior, maintaining a pressure differential that keeps the contained zone at lower press

Question 15

What Are the Potential Risks of Not Implementing ICRA in My Organization?

Accepted Answer

The risks are well-documented and serious. Healthcare facilities that fail to implement appropriate ICRA measures during construction face potential patient harm from construction-associated infections (CAIs), Joint Commission findings under LS.01.02.01 and IC standards, CMS Conditions of Participation deficiencies, stop-work orders from the authority having jurisdiction, and liability exposure from patient harm events. Documented Aspergillus out

Question 16

How Does ICRA Address Compliance Issues in the Healthcare Industry?

Accepted Answer

ICRA 2.0, developed by the American Society for Health Care Engineering (ASHE), provides a structured matrix that cross-references construction activity type with patient risk level to produce a required barrier class. This risk-based approach creates a documented decision trail that demonstrates due diligence to Joint Commission surveyors, CMS inspectors, and legal reviewers. Following the ICRA process means the facility has a defensible record

Question 17

What Training or Certification Is Needed to Effectively Implement ICRA?

Accepted Answer

Healthcare construction contractors working in facilities that require ICRA compliance should be familiar with ASHE ICRA 2.0 guidelines. Many healthcare facilities require contractor personnel to complete facility-specific infection control orientation before accessing patient care areas. The ICRA matrix evaluation itself is typically completed jointly by the facility's Infection Preventionist, the facility engineer, and the project manager befor

Question 18

How Much Do Temporary Walls Typically Cost for Residential Versus Commercial Projects?

Accepted Answer

5DCCS focuses on commercial, institutional, and industrial projects rather than residential work. In commercial settings, the total cost of a containment engagement depends on the scope, product type, project duration, and whether you're renting or purchasing. For context, industry cost analyses show that traditional drywall containment in the Bay Area runs roughly $149–$162 or more per linear foot over its full lifecycle (including installation,

Question 19

Are There Additional Fees for Installation or Removal of Temporary Walls?

Accepted Answer

When you rent through 5DCCS, delivery, professional installation, and removal are part of the service. Our full-service rental model means you're not coordinating multiple vendors or sourcing installation labor separately. The scope of what's included is always clarified upfront before any commitment. Contact us to discuss your project and we'll walk through exactly what's covered.

Question 20

Do You Offer Discounts for Larger Projects or Long-Term Rentals of Temporary Walls?

Accepted Answer

Pricing is structured based on scope, project duration, and product type. Longer engagements and multi-phase projects often have different economics than short-term deployments. We work with general contractors and facility managers to structure arrangements that make sense for the project. Reach out and we'll discuss what works for your situation.

Question 21

What Factors Influence the Pricing of Temporary Walls in Different Environments?

Accepted Answer

Several variables shape cost: the linear footage of containment needed, ceiling height (systems telescope up to 10'3" standard, with extensions reaching 18–40 feet depending on the product), project duration, the performance tier required (basic dust containment vs. fire-rated vs. ICRA Class IV/V healthcare compliance), access conditions at the site, and whether the engagement is a single installation or a multi-phase project requiring reconfigur

Question 22

Can I Get a Detailed Quote Before Committing to Temporary Wall Services?

Accepted Answer

Yes, absolutely. We provide project-specific quotes based on your scope. The process typically involves a conversation or site walkthrough to understand your layout, ceiling height, compliance requirements, and timeline. There is no obligation to engage from a quote conversation. Contact us at (855) 684-3752 or through the website to get started.

Question 23

What Factors Influence the Pricing of Construction Containment Services and Materials?

Accepted Answer

The primary cost drivers are: the type of containment system required (modular temporary walls vs. poly sheeting vs. drywall), the project's regulatory requirements (ICRA class, fire rating, NFPA 241, Cal/OSHA), the linear footage and height of barrier needed, project duration, number of phases, site access constraints, and the full-service scope (delivery, installation, reconfigurations, and removal). In the Bay Area, labor rates also factor mea

Question 24

How Much Should I Expect to Pay for Temporary Construction Containment Solutions?

Accepted Answer

Costs vary widely based on scope and method. Published industry benchmarks place drywall containment in the Bay Area at $149–$162+ per linear foot over its full lifecycle, poly sheeting at roughly $59 per linear foot, and reusable modular wall systems at significantly lower recurring cost per deployment once the product is in service. We don't quote from a fixed rate sheet because project conditions vary. Contact us for a project-specific estimat

Question 25

Are There Additional Costs Associated With Installation and Maintenance of Construction Containment?

Accepted Answer

With 5DCCS's full-service rental model, installation and removal are included. There are no hidden setup charges in our standard engagements. For owned systems, buyers should budget for storage, transport, and any field repairs over time — though the reusable nature of modular walls dramatically lowers long-term cost compared to building and demolishing drywall repeatedly.

Frequently Asked Questions

No matching questions

Let's Talk Through Your Project