Temporary Walls
in Palo Alto
for Occupied Projects
5DCCS delivers, installs, and removes modular containment systems for occupied-space projects in Palo Alto, from hospital and clinic renovations to Stanford Research Park labs and University Avenue offices. Based in San Jose, a short drive away. Veteran-owned.
Renovating an Occupied Building in Palo Alto Takes Planning.
Palo Alto combines hospital and clinic campuses around Stanford, the VA Palo Alto Health Care System, lab and office tenants in Stanford Research Park, and busy commercial streets like University Avenue and California Avenue. Renovations in buildings like these often happen while people are still working inside, so dust, noise, and foot traffic have to be controlled without shutting down the operations around the work.
Building permits and plan review in Palo Alto go through the City's Development Services, and the Fire Prevention Bureau handles fire plan checks and inspections. Requirements and timelines vary by project scope and occupancy, so it helps to confirm them early with your permit consultant or the City. Hospital projects can add another layer: licensed hospital alteration work is generally subject to state HCAI review unless an exemption applies, and each facility's infection control team typically signs off on containment before work begins in patient-care areas.
The City also limits when construction can happen. Its published construction hours generally run Monday through Friday from 8 AM to 6 PM and Saturday from 9 AM to 6 PM, with no work on Sundays or City holidays, deliveries included. We plan wall deliveries and installations around those hours and your facility's own operating schedule.
Hospitals & Medical Campuses
Hospital and clinic renovations in the Stanford and Palo Alto area happen around active patient care. ICRA-based containment is typically planned with each facility's infection control team before work begins.
Stanford Research Park & Labs
Research and lab tenants renovate space that cannot stay offline for long. Modular walls separate the work zone from active labs and offices, with HEPA-filtered negative air options where the project calls for them.
University Ave & California Ave
Offices, retail, and mixed-use buildings in downtown Palo Alto and the California Avenue district often stay open during tenant improvements. Modular walls separate the work zone from tenants, customers, and visitors.
Temporary Wall Rental and Installation in Palo Alto
From full-service turnkey rentals to self-service options and direct sales, 5DCCS provides temporary construction walls for healthcare, lab, commercial, and public projects across Palo Alto.
Full-Service Wall Rentals
Our trained crew handles everything, including site assessment, custom containment planning, delivery, installation, ongoing support, and removal. Ideal for Palo Alto healthcare, lab, and commercial projects where your team needs to stay focused on the build.
- Professional installation & removal by trained crew
- Custom containment planning for your floor plan
- ICRA Class IV/V configurations available
- Egress and fire barrier documentation provided
Self-Service Wall Rentals
Rent the system and have your own crew install it. We deliver to your Palo Alto job site, and you manage setup on your schedule. A cost-effective option for experienced GC crews working in Silicon Valley.
- Modular panels delivered to your Palo Alto job site
- Installation guidance & technical support included
- Flexible daily, weekly, or monthly terms
- Multiple wall system options available
Modular Wall System Sales
Purchase your own system for repeat projects across Silicon Valley. Long-term cost savings for facility managers and GCs running continuous renovation programs at healthcare campuses, labs, and commercial properties.
- Panel systems that support ICRA Class IV/V containment plans
- 13+ panel configurations for any project type
- Wrappable for custom branding or wayfinding
- Reusable across multiple projects and sites
Containment Consultations
Not sure which solution fits your Palo Alto project? Our team assesses your site, talks through permit, fire, and work-hour considerations, and recommends the right containment approach for your scope, timeline, and budget.
- Site assessment & containment strategy
- Permit & fire department coordination guidance
- ICRA planning support for healthcare projects
- Budget optimization and phasing advice
Who We Serve in Palo Alto
From hospital renovations to Stanford Research Park labs and the offices around University Avenue, 5DCCS supports the range of occupied-space projects found in Palo Alto.
Healthcare & Hospitals
Containment that supports ICRA-based infection control plans for hospitals, medical offices, and outpatient centers, including Class IV and V configurations where the facility specifies them. We coordinate with each facility's infection control team.
Labs & Life Sciences
Research labs and biotech spaces need clean separation between active research and construction. Modular containment helps protect sensitive work areas, with HEPA-filtered negative air available where the project calls for it. Lab requirements vary, so we coordinate with your facility team.
Commercial & Tech Offices
Tech and professional offices in downtown Palo Alto, along California Avenue, and in Stanford Research Park often renovate while teams keep working. Modular walls separate the work zone and keep occupied floors usable.
Federal & Public Sector
Federal healthcare campuses and public facilities have their own procurement and safety requirements. As a veteran-owned company with SDVOSB and DVBE certifications, 5DCCS can support federal and public-sector projects.
Education & Civic
School, university, and civic buildings often renovate while students, staff, and the public are on site. Modular walls separate the work area and help keep occupied spaces safe and usable.
Hospitality & Retail
Hotels and retail areas such as University Avenue and California Avenue need professional containment for renovations in active, customer-facing environments.
Palo Alto Permits, Fire Prevention, Work Hours, and Infection Control
Building permits and plan review in Palo Alto are handled through the City's Development Services, whose Development Center is at 285 Hamilton Avenue. The Fire Prevention Bureau handles fire plan checks, permitting, and field inspections, including considerations such as temporary egress and fire barrier integrity. Requirements vary by occupancy and project scope, so we recommend confirming them early with your permit consultant or the City.
For hospital projects, state HCAI review may apply in addition to local requirements, and each facility's infection control team has its own protocols. We provide installation details that support the project's ICRA plan and coordinate with your project team so our approach fits the facility's requirements.
5DCCS documents every installation in a way that supports your permit and inspection process, and we schedule deliveries and installs with the City's construction hours in mind.
Permits and Fire Plan Check
Development Services handles commercial alteration permits, and the Fire Prevention Bureau handles fire plan checks and inspections. Review timelines vary by project type. 5DCCS provides installation documentation that can support your submissions.
City Construction Hours
Palo Alto's published hours generally allow construction Monday through Friday from 8 AM to 6 PM and Saturday from 9 AM to 6 PM, with no work on Sundays or City holidays. Confirm current rules and any permit conditions with the City before scheduling.
Debris Diversion
Palo Alto's construction and demolition debris ordinance calls for projects to salvage or divert at least 75% of debris from landfill. Reusable modular panels can reduce the drywall demolition waste that temporary partitions create. Whether the ordinance applies depends on your project, so confirm with the City.
Cal/OSHA Dust and Silica Rules
California's construction dust standards, including Title 8 Sections 1530.1 and 1532.3 for dust-generating operations and respirable crystalline silica, call for dust controls and, in some cases, written exposure control plans. 5DCCS provides HEPA-filtered containment options and installation documentation that can support your compliance obligations.
ICRA and Hospital Projects
Hospital renovations typically require an Infection Control Risk Assessment, and the facility's infection control team determines the containment class. 5DCCS offers modular wall configurations that support Class IV and V plans where specified, and we coordinate with your project team on installation details.
How 5DCCS Works in Palo Alto
Consultation & Site Assessment
We review your floor plan, scope, timeline, and compliance considerations, including permit, fire department, and facility ICRA review processes.
Custom Containment Plan
We design a containment layout that isolates the work zone, maintains egress, and addresses the fire and infection control requirements that apply to your project.
Delivery & Installation
Our trained crew delivers and installs your system on your schedule, typically in hours, within the City's work hours.
Ongoing Support
We adjust, reconfigure, or extend your containment as your project evolves. One call, one partner throughout your Palo Alto project.
Removal & Closeout
Clean removal, no debris, no damage. Your space is returned to normal, ready for inspection and occupancy.
Common Questions About Temporary Walls in Palo Alto
It depends on the full scope of your project. Cal/OSHA Section 341(4)(E) addresses an exemption for certain interior partition work from Project Permit requirements, but whether that applies depends on what else the project involves. If your commercial alteration requires a City of Palo Alto building permit, the containment plan may need to be reflected in your permit drawings, and tall walls, structural attachments, or related MEP work can bring their own requirements. We recommend confirming your specific requirements with your permit consultant or the City's Development Services. 5DCCS can provide installation documentation to support those submissions.
Requirements depend on the building's occupancy classification, existing fire protection systems, and the scope of work. Generally, egress paths need to remain clear and accessible, and fire-rated separations may need to be maintained where existing conditions require them. We document our installations with fire-rating information and egress notes that can support your coordination with the Fire Prevention Bureau, and we recommend confirming specifics with the fire department early in the project.
Yes. We install containment that supports ICRA Class IV and Class V plans where the facility specifies them, and we work with infection control officers and facility managers on installation details. Our crews follow healthcare facility protocols including badge requirements, quiet hours, and patient safety procedures. For licensed hospitals, state HCAI requirements may apply in addition to the facility's own ICRA process, so we recommend involving your project team early.
The City's published guidance generally allows construction Monday through Friday from 8 AM to 6 PM and Saturday from 9 AM to 6 PM, with no work on Sundays or City holidays, and the limits apply to deliveries too. Permit conditions can add their own limits, so confirm current rules with the City before scheduling. We plan installations around both the City's hours and your facility's operating hours.
Modular walls can separate a work zone from active lab and office space, and we offer HEPA-filtered negative air options where the project calls for them. Lab and cleanroom requirements vary by tenant and use, so we coordinate with your facility and environmental health and safety team on the containment approach before installation.
We serve all of Palo Alto, including Downtown, California Avenue, Stanford Research Park, Midtown, and South Palo Alto. We also serve nearby Menlo Park, Mountain View, Los Altos, Redwood City, Sunnyvale, and Santa Clara, plus the wider Bay Area, including San Jose, San Francisco, and Oakland. Our office is in San Jose, a short drive from Palo Alto. See our full service area for other cities. Same-day quotes are available throughout our service territory.
Ready to Contain Your Palo Alto Project?
Get a same-day quote from Northern California's modular containment specialists. Veteran-owned and ready for occupied-space projects in Palo Alto and across Silicon Valley.